Grizzly Electric Winch 13,000 lbs 12V 180:1 – Synthetic Rope
339,00 €
Grizzly 13,000 lbs (5,897 kg) 12V electric recovery winch with a 180:1 planetary gearbox and synthetic rope.
- Capacity: 13,000 lbs (5,897 kg)
- Motor: 6.5 HP, 4.8 kW, 12V DC
- Rope: 10 mm x 25 m (Gray)
- Gear ratio: 180:1
- Remote: Wired and Wireless
In stock
Grizzly 13,000 lbs 12V electric winch
A 13,000 lbs 12V recovery winch built for real off-road work. The 180:1 three-stage planetary gearbox delivers heavy pulling power from a compact housing, and the automatic brake holds the load whenever the motor stops.
Technical specification
- Pulling capacity: 13,000 lbs (5,897 kg)
- Synthetic rope: 10 mm x 25 m (Gray)
- Motor: 6.5 HP, 4.8 kW, 12V DC
- Voltage: 12V
- Gearbox: 3-Stage Planetary Gear
- Gear ratio: 180:1
- Clutch: Manual Engage/Disengage
- Brake: Automatic
- Fairlead: Aluminum Hawse (Red)
- Remote control: Wired and Wireless
- Dimensions: 546 mm x 160 mm x 222 mm
- Mounting bolt pattern: 254 mm x 114.3 mm
- Maximum line load: 5,897 kg
- Winch weight: 28 kg
- Warranty: 24 Months
Rope and fairlead
Synthetic rope stores almost no energy under tension, so if the line does part it drops rather than whipping back – a decisive safety advantage over steel. It is also light enough to pull out by hand and will not develop the sharp broken strands that make old steel cable dangerous to handle. Use it only with a hawse fairlead and keep it clear of hot surfaces.
Fitting
Mounting bolt pattern is 254 mm x 114.3 mm, so it fits winch plates and bumpers cut to that pattern. Feed the winch from the battery with correctly rated cable and a suitable isolator, and make sure the mounting plate is tied into the chassis rather than the bumper skin alone.
Operating advice
- Rig a snatch block for heavy or angled pulls – it roughly halves the load on the winch and the anchor
- Winch in short bursts and let the motor cool between pulls
- Keep at least five wraps of line on the drum at all times
- Never use a recovery winch to lift or suspend a load
| Weight | 28 kg |
|---|---|
| Dimensions | 54,6 × 16 × 22,2 cm |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Universal Winch Mounting Plate for Grizzly 9500 – 13000 lbs
Steel mounting plate for Grizzly winches from 9500 to 13000 lbs. At these capacities the mounting is what fails first if it is under-engineered - the plate spreads the load across the chassis rails so the pull is carried by the vehicle structure, not by bumper brackets.
- Rated for the heavier 9500-13000 lbs Grizzly winches
- Spreads pulling load across the chassis
- Steel construction
Universal Winch Mounting Plate for Grizzly 8500 lbs
Steel mounting plate for Grizzly 8500 lbs winches. A winch is only as strong as what it is bolted to: the plate spreads the pulling load across the chassis rails instead of concentrating it on a bumper, which is what bends bumpers and tears out mounting bolts.
- Spreads winch load across the chassis rather than the bumper
- Drilled for the 8500 lbs Grizzly bolt pattern
- Steel construction
Gearbox Support for Grizzly Winch – 8500 / 9500 / 13000 lbs
Replacement gearbox end support for Grizzly electric winches. This casting locates the planetary gearbox and carries the drum bearing at that end, so any play or damage here shows up immediately as drum wobble and uneven rope winding.
- Locates the planetary gearbox and drum bearing
- Original-specification replacement part
- Cures drum wobble caused by a worn or damaged support
OFM4X4 Synthetic Winch Rope 12mm x 50m with Hook – Red, 10,500 kg
12 mm x 50 m UHMWPE synthetic winch rope with hook, in red. Six times lighter than steel cable, far safer if it fails, and easy to pull out to an anchor by hand.
- Size: 12 mm x 50 m
- Strength: 10,500 kg
- For winches: Off-road vehicle winches (10,000–20,000 lbs)
- Hook: Included
Use with a hawse fairlead only.
OFM4X4 Synthetic Winch Rope 10mm x 28m with Hook – Blue, 10,500 kg
10 mm x 28 m UHMWPE synthetic winch rope with hook, in blue. Six times lighter than steel cable, far safer if it fails, and easy to pull out to an anchor by hand.
- Size: 10 mm x 28 m
- Strength: 10,500 kg
- For winches: For Auto Off-Road winches with a capacity of 9,500–13,000 lbs
- Hook: Included
Use with a hawse fairlead only.
Reviews
There are no reviews yet.