Gearbox Support for Grizzly Winch – 8500 / 9500 / 13000 lbs
23,00 €
Replacement gearbox end support for Grizzly electric winches. This casting locates the planetary gearbox and carries the drum bearing at that end, so any play or damage here shows up immediately as drum wobble and uneven rope winding.
- Locates the planetary gearbox and drum bearing
- Original-specification replacement part
- Cures drum wobble caused by a worn or damaged support
Only 2 left in stock
Gearbox support for Grizzly winches
Replacement gearbox end support for Grizzly electric winches. This casting locates the planetary gearbox and carries the drum bearing at that end, so any play or damage here shows up immediately as drum wobble and uneven rope winding.
Key points
- Locates the planetary gearbox and drum bearing
- Original-specification replacement part
- Cures drum wobble caused by a worn or damaged support
- Fits the common 8500-13000 lbs Grizzly range
Compatibility
Grizzly electric winches rated 8500 lbs, 9500 lbs and 13000 lbs.
Specification
- Part: Gearbox Support for Grizzly Winch – 8500 / 9500 / 13000 lbs
- Weight: 2 kg
| Weight | 2 kg |
|---|
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Air Clutch Lever for Grizzly Winch
Replacement air-actuated clutch lever for Grizzly electric winches. The clutch disengages the drum from the gearbox so rope can be pulled out freely by hand - the first step of almost every recovery, and a part that gets knocked and corroded more than most.
- Engages and disengages the drum from the gearbox
- Air actuated - no need to reach into the bumper
- Original-specification replacement
Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls - the norm rather than the exception in real recoveries.
- For steel cable only - do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
Universal Winch Mounting Plate for Grizzly 9500 – 13000 lbs
Steel mounting plate for Grizzly winches from 9500 to 13000 lbs. At these capacities the mounting is what fails first if it is under-engineered - the plate spreads the load across the chassis rails so the pull is carried by the vehicle structure, not by bumper brackets.
- Rated for the heavier 9500-13000 lbs Grizzly winches
- Spreads pulling load across the chassis
- Steel construction
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset
