Grizzly Electric Winch 8,500 lbs 12V 150:1 – Steel Cable
306,00 €
Grizzly 8,500 lbs (3855 kg) 12V electric recovery winch with a 150:1 planetary gearbox and steel cable.
- Capacity: 8500 lbs (3855 kg)@@BR@@
- Motor: 5.2 HP (3.9 kW)@@BR@@
- Cable: 18 m x Ø 8 mm@@BR@@
- Gear ratio: 150:1
- Remote: Wired and wireless@@BR@@
In stock
Grizzly 8,500 lbs 12V electric winch
This 8,500 lbs 12V winch is sized for full-size 4x4s and heavily loaded pick-ups. It ships with galvanised steel cable and a roller fairlead for hard, abrasive recovery work.
Technical specification
- Pulling capacity: 8500 lbs (3855 kg)@@BR@@
- Steel cable: 18 m x Ø 8 mm@@BR@@
- Motor: 5.2 HP (3.9 kW)@@BR@@
- Voltage: 12V@@BR@@
- Gearbox: Three-stage planetary@@BR@@
- Gear ratio: 150:1
- Clutch: Manual engage/disengage@@BR@@
- Brake: Automatic@@BR@@
- Fairlead: Aluminum hawse@@BR@@
- Remote control: Wired and wireless@@BR@@
- Control box: Fixed position (central)@@BR@@
- Dimensions: 435 mm x 162 mm x 185 mm@@BR@@
- Mounting bolt pattern: 165 mm x 114.3 mm@@BR@@
- Maximum line load: 3630 kg Electric Winch 8,500 lbs 150:1 Grizzly Winch with Steel Cable
- Winch weight: 29 kg@@BR@@
Rope and fairlead
Galvanised steel cable is highly abrasion resistant and shrugs off dragging over rock and gravel. It stores significant energy under tension, so always lay a damper over the line during a pull and never step over a loaded cable. Wear gloves – used cable develops sharp broken strands.
Fitting
Mounting bolt pattern is 165 mm x 114.3 mm@@BR@@, so it fits winch plates and bumpers cut to that pattern. Feed the winch from the battery with correctly rated cable and a suitable isolator, and make sure the mounting plate is tied into the chassis rather than the bumper skin alone.
Operating advice
- Rig a snatch block for heavy or angled pulls – it roughly halves the load on the winch and the anchor
- Winch in short bursts and let the motor cool between pulls
- Keep at least five wraps of line on the drum at all times
- Never use a recovery winch to lift or suspend a load
| Weight | 32 kg |
|---|---|
| Dimensions | 43,5 × 16,2 × 18,5 cm |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Grizzly Winch Motor – 12V Replacement Series Wound Motor
Replacement 12V series-wound motor for Grizzly electric winches. Winch motors are the component most often killed by long pulls without a cooling break - brushes wear, the armature overheats and pulling power falls away.
- 12V series-wound motor, original specification
- Restores full pulling power on a tired winch
- Far cheaper than replacing a complete winch
Crossmember Support for Grizzly Winch – 9500 / 13000 lbs
Replacement crossmember support for Grizzly electric winches. The crossmember ties the motor end and gearbox end of the winch together and carries a share of the pulling load into the mounting plate, so a bent or cracked one should be replaced rather than straightened.
- Original-specification replacement part
- Ties the motor and gearbox housings together
- Transfers pulling load into the winch mounting plate
OFM4X4 Synthetic Winch Rope 10mm x 28m with Hook – Blue, 10,500 kg
10 mm x 28 m UHMWPE synthetic winch rope with hook, in blue. Six times lighter than steel cable, far safer if it fails, and easy to pull out to an anchor by hand.
- Size: 10 mm x 28 m
- Strength: 10,500 kg
- For winches: For Auto Off-Road winches with a capacity of 9,500–13,000 lbs
- Hook: Included
Use with a hawse fairlead only.
Reviews
There are no reviews yet.